Electrical
Supply: 380 V / 50 Hz / 3-phase
Listed total power: 7.5 kW
Component power breakdown: confirm against the supplied machine nameplate
Nylon zipper forming equipment
H-202 Nylon Zipper Coiling Machine
The H-202 standard model is a hot-stamping nylon zipper coiling machine. The detailed standard-model specification lists chain sizes #3–#8 and a forming speed of 15–20 metres per minute. Separate chain-size reference data includes #9 and #10 configurations; confirm the exact machine variant and output table before ordering.
Standard model: #3–#815–20 m/min*Hot stamping380V / 50Hz / 3Ph
*Detailed standard-model specification; confirm chain-specific configuration before ordering.
Request H-202 Quote on WhatsAppH-202 output and chain specifications
This chain-dimension and output reference table is reproduced separately from the detailed H-202 standard-model specification. The standard-model entry lists #3–#8 and 15–20 m/min; the table below includes #9/#10 and different chain-specific output values. Confirm model variant and configuration before using these figures for production planning.
| Chain / type | Pitch (mm) | Tooth (mm) | Width (mm) | Thickness (mm) | Nylon wire (mm) | Output (m/min) |
|---|---|---|---|---|---|---|
| #3 | 4.2 | 0.83–0.86 | 2.60–2.65 | 1.50–1.60 | Φ2.0–2.5 | 8–12 |
| #3 Invisible | 4.2 | 0.80–0.82 | 2.53–2.58 | 1.30–1.40 | Φ1.8–2.0 | 10–15 |
| #4 | 4.9 | 0.85–0.88 | 2.95–3.00 | 1.50–1.55 | Φ2.5–3.0 | 7–11 |
| #5 | 4.0 | 1.20–1.23 | 4.15–4.20 | 2.20–2.25 | Φ3.0–3.5 | 6–10 |
| #6 | 4.4 | 1.20–1.25 | 4.20–4.25 | 2.20–2.25 | Φ3.5–4.0 | 5–9 |
| #8 | 4.5 | 1.30–1.33 | 4.40–4.45 | 2.40–2.45 | Φ4.0–4.5 | 4–8 |
| #10 | 6.25 | 1.90–1.95 | 6.40–6.45 | 3.35–3.45 | Φ5.0–5.5 | 3–6 |
H-202 standard model data for facility planning
Footprint and weight
Overall dimensions: 3200 × 1800 × 2200 mm
Machine weight: 950 kg
Air source: 0.6–0.8 MPa
Production protection
Filament runout auto-stop, center-yarn runout auto-stop, left/right chain difference detection and abnormal-sound alarm.
Process and operating features
Hot stamping
Nylon filament is softened before impact to form zipper teeth. The site’s process description also identifies cold-air setting after forming.
Servo drive and PLC
The listed H-202 configuration uses servo drive and PLC control for the coiling process.
Automatic protection
Runout detection can stop the machine when nylon monofilament or center yarn is exhausted. The site also lists chain-difference and abnormal-sound alerts.
Maintenance reference
| Frequency | Maintenance task |
|---|---|
| Every 4 hours | Add heavy-duty gear oil #85–90 (SAE #60) to the screw groove. The current maintenance guide says not to use grease in this location. |
| Weekly | Inspect drive-belt tension and wear. |
| Monthly | Inspect the striking-head assembly and center-rod alignment / wear. |
| Quarterly | Test heating-element efficiency. |
| Every 6 months | Replace gear oil, clean oil paths and inspect wear parts. |
Follow the machine manual and confirm maintenance procedures with a qualified technician for the installed configuration.
H-202 frequently asked questions
Which zipper chain sizes can the H-202 standard model process?
The detailed standard-model specification lists #3–#8. Separate chain-reference data includes #9 and #10; confirm the machine variant for those sizes.
What is the H-202 standard-model forming speed?
The detailed standard-model specification lists 15–20 m/min. Other chain-specific reference figures appear in the knowledge base and must be matched to the exact variant.
What electrical supply and power are listed?
The H-202 standard model is listed at 380 V / 50 Hz / 3-phase and 7.5 kW total power. The component power breakdown is not published until it is reconciled with the supplied machine nameplate.
Can I order replacement parts?
XMDhardware lists spare parts for zipper coiling and sewing equipment. Use the parts catalogue and send the part number or a photo when requesting a quotation.
Need an H-202 quotation or parts matching?
Send your target chain size, required output, destination country and any reference part number.
Download H-202 forming machine parts catalogue (PDF) · View HR-3200T sewing machine · All products